Ryterna Midrib (standard colours) garage door Steel Ryterna

Ryterna Side Sliding Sectional Doors are a great answer if you are looking for a stunning, high specification insulated door, that makes use of the overhead space in your garage.

These doors are made to order with vertically suspended panels of double skinned steel filled with freon-free PU foam, interlocking and sliding on a high quality aluminium rail, around the corner of your garage and against the internal side wall. There are endless configurations to suit any shape of garage. Brush seals and a high performance rubber seal work to ensure the best possible insulation and protection from the elements.

You can choose your high quality finish in any RAL colour. The Mid Rib design comes in three beautiful surface finishes; Slick, Woodgrain and Stucco. The slick finish is a satin smooth finish that gives any garage a sleek, modern look. The woodgrain embossed finish mimics a traditional painted wooden door. The stucco finish is stippled and provides an interesting, matte style finish. 

Side sliding doors require minimal headroom and, by design, leave the overhead space in your garage totally available to use as you please. This is especially useful for garages with very high ceilings, or where access is needed to the ceiling - for example for storage, car lifts or a mezzanine floor. The video below shows the side sliding sectional doors in action:
 

Video of the side sliding sectional door in action!

Ryterna Side Sliding Doors can open to either side. Also, for wider projects we recommend Bi-parting the garage doors. You can split the door in two even parts. The only limitation is there must be at least 3 panels on one side, approx. 1.5 metres wide. The high quality guide rails are both heavy duty and maintenance free. The threshold profile is mounted on top of the floor. The hardware is made from anodised aluminum and zinc plated steel. High quality trolleys with roller bearings ensure smooth and easy motion. Therefore Ryterna side sliding garage doors have excellent performance and long service life.

We recommend openings wider than 5 metres are split into two bi-parting doors. The maximum width for one door is 5m so the bi-parting solution allows wide openings up to 10m to be catered for. Side sliding garage doors go behind the reveal, meaning that there is no frame required, and you can retain the full brick-to-brick daylight opening. As a result Ryterna developed aluminium lintel profile and post system. Elegant, easy to install and maintenance free profiles are the perfect solution. Furthermore aluminium profiles can be painted any colour to match garage door or house facade.

Standard Options

> Anodised aluminium hardware
> Zinc coated hardware
> Guiding rail for 120mm headroom
> Whole perimeter brush sealing
> Aluminium 120mm lintel profile
> Double glazed finger pinch proof panels
> Fixings for brick/timber/metal

Installation Depth D
(excluding door opener length)

* W - opening width
** min side-room on opening side
*** Operator movement range must be longer than W, if standard rail is too short use additional rail extensions. Please check for door opener specifications.

Lintel profile

> Standard option for fixing to lintel.
Option for fixing to ceiling will come with additional brackets and aluminium profile painted door colour.
> Additional lintel profile for side wall.

Adjustable door opener bracket

> For door opener installation on lintel or ceiling along opening.

Sideroom

> Standard sideroom > 500mm. Standard option. Bended guiding rail R420.
> Small sideroom ≤ 500mm. Bended guiding rail R520 + extension profile.
> Double SSD. x2 single side sliding doors. Min required headroom - 120mm. Min sideroom on closing side 70mm.

Installation Instructions are provided with every door.

Warranty terms:
•    The 10-year warranty is granted for Ryterna garage door sections from rust –through perforation, delamination, and disintegration.
•    5-year warranty is given for wearing parts such as springs, cables, drums, rollers, hinges on residential sectional garage doors TL, R40 under normal use of max 5 open-close cycles per day.
•    5-year warranty on springs, cables, drums, rollers, hinges on industrial sectional doors TLP under normal use up to 10 open-close cycles per day.
•    Nonstandard color painted doors and doors cladded in Okoume, Retro, Alumax and other special design doors, the 2-year warranty period is applied.
•    Visual inspection of door panels should be done at distance not less than 3m from the door.
•    2-year warranty for wearing parts of SH1, SH2 and SSD type doors.

Warranty is applicable only in the country where the door was purchased through the authorized distribution channels. To enable warranty claim to be proceeded, undersigned warranty card (in user manual) and original invoice with date of purchase should be provided.

The warranty does not cover:
•    Mechanical damages due to improper transportation or portage.
•    Mechanical damages due to improper installation, maintenance and operation.
•    Normal wear and tear.
•    Deflection of door sections because of heat absorption – Bi-metal effect (Dark color doors should be avoided to be exposed to direct sunlight).
•    Color shade changes caused by natural environment influence.
•    Humidity condensation.
•    Damages caused due to improper storage of the product (in humid environment, outdoor, and (or) longer than 3 moths)  
•    Damages caused by absence of regular maintenance (proof-book registered)
•    Damages due to use of non-origin parts.
•    Damages caused due to external influences such as salt, fire, water, acids, alkali, abnormal environmental influences (e.g. salty water coastal regions)    
•    Warranty claim can be enabled only in presence of production number on the product.

Damages or defected goods should be claimed in 5 working days after delivery. Damages made during the transportation should be fixed at unloading. Report must be made before installation if door parts are damaged during transportation, have scratches or dents or missing parts.
Images must be attached with damaged parts still in the package. If sending close up image, please make sure to send another one from the distance, so that packaging could be seen.