The Seceuroglide Insulated Sectional Door design makes the most of the space both inside and outside of the garage, by rising vertically allowing you to park right up to the door. Manufactured here in the UK, the high quality, excellent value, ease of installation and use and fast delivery times make these insulated steel sectional doors an outstanding choice for any garage. Side springs as standard for the easiest handling and installation.
Please note: panel configuration may vary from online images shown depending upon height of door. We strongly advise that you check a mock up diagram prior to the door going into production.
Made to Measure Sizes at no extra cost
Insulated 40mm double skinned panels
Simple side spring assembly
Easy DIY installation
1
Choose Your Sizes
We're ready to help youCall us on 01926 463 888Office Hours: Mon - Fri 8:30 - 17:30
The Seceuroglide Sectional Garage Door creates a stylish feature that is sure to enhance the look of your home but also the security and insulation. The Ribbed sectional garage door by Seceuroglide is a timeless narrow ribbed design that can be styled many different ways, and is available in a diverse range of long wearing finishes.
The Seceuroglide sectional garage door has a 40mm thick insulated steel panel manufactured to the highest specification, filled with PU foam - this along with the high grade rubber weather seals on all sides ensures a very high level of insulation, meaning an energy efficient and money saving door. This also goes hand-in-hand with security - the thick panels and the sophisticated locking system ensures peace of mind for you and your whole family. Whether you have a manual or an automated door you will be totally protected from intruders.
The Sectional garage door design makes the most of your driveway and garage; vertical operation ensures you can park right up to your door on either side and use your entire driveway. The Elite requires just 130mm headroom for motorised operation and 100mm for manual operation.
There are two free of charge standard finishes; a traditional style White woodgrain embossed finish, or a smooth and modern Dura finish. Additionally, there is a huge range of 31 different optional standard colour finishes, including Heritage and Metallic colours, and the Centre Ribbed design can also be manufactured in a Medium Oak foiled finish. With this range of choices, there will be something to suit every garage.
Handles This door is not designed for manual operation and does not come with a handle, regardless of if a motor is selected or not.
The inbetween installation kit uses the Executive framing kit as standard, this is a 100mm wide aluminium box section frame on 2 sides and reduces the structural opening width by at least 200mm on the width as well as either 100 or 130mm on the height - this gives the ordering dimensions. A tolerance should always be allowed for in these calculations and we recommend between 5-10 mm all round.
Width measurements should be taken in 3 places as a minimum and take the smallest measurement as it is inbetween. Take off 10-20mm on the width and then 5-10mm for the height from floor to lintel, again measured in 3 places to work out your ordering sizes.
Please note: panel configuration may vary from online images shown depending upon height of door. We strongly advise that you check a mock up diagram prior to the door going into production.
The Seceuroglide Elite Sectional Doors are suitable for openings up to 5 metres wide:
Manual or electric operation
Minimum side room required: 85mm
Actual drive through height (manual): DOH - 230mm
Actual drive through height (electric): DOH - 20mm
Minimum head room required (manual): 100mm
Minimum head room required (electric): 130mm
Installation Instructions are provided with every door.
All Seceuroglide products are guaranteed against defect of material or workmanship by SWS UK subject to correct installation, maintenance and operation for a period of 2 years from the date of purchase.
The NRG Black Edition electric motor carries a 7 year guarantee*
*7 Year warranty available on the motor if registered.
The inbetween installation kit uses the Executive framing kit as standard, this is a 100mm wide aluminium box section frame on 2 sides and reduces the structural opening width by at least 200mm on the width as well as either 100 or 130mm on the height - this gives the ordering dimensions. A tolerance should always be allowed for in these calculations and we recommend between 5-10 mm all round.
Width measurements should be taken in 3 places as a minimum and take the smallest measurement as it is inbetween. Take off 10-20mm on the width and then 5-10mm for the height from floor to lintel, again measured in 3 places to work out your ordering sizes.
A:
Sectional garage doors are available in a far wider range of sizes,
including purpose made sizes up to 8000mm, so measuring and ordering
is relativ
(read more)
A:
Yes of course and it quite often may be necessary if you do not have
a brick return face to install to....
All sectional and roller garage doors i
(read more)
A:
Yes, this is perfectly possible with many door types and models.
Generally any garage door which is available in a powdercoat finish
will have an o
(read more)
A:
They are always delivered by either the manufacturer or ourselves in
specialised transport vehicles. The smaller items such as the remote
control o
(read more)
A:
Most doors and electric operators are supplied with full printed
installation instructions.
Many PDF installation instructions can also be found
(read more)