The GDO Icon range of steel side hinged doors offer a higher specification over our Classic range, using reinforced internal door panel bracing for a more stable and secure overall construction. They are uninsulated door leaves with a single skin steel panel construction, but they have the same enhanced features integrated as our insulated door models, with rubber seals on the door leaf and outer steel sub frame.
* Made to measure sizes as standard at no extra cost. Simply choose the Overall width and Overall height including the factory fitted steel sub fixing frame, which is finished in the same colour as the door selection. Sizes available up to 2750mm wide and 2350mm high.
* Concealed shoot bolts on the slave leaf - top and bottom.
* 3 dimensional hinges as standard for maximum adjustment in all directions.
* Steel bracing to the rear of the door panels for a more rigid final door leaf.
* Outward swinging as standard, inwards on request and extra cost
With the more robust outdoor panel construction comes the robust handle and door locking, using a latch and deadlock system as standard. Adjustable keep for precise latching. Internal thumb turn for effortless daily operation.
Black lever handle as standard.
Black 3d external hinges as standard.
Optional 15mm aluminum threshold when you want to optimise your overall weather resistance. This will require a level floor to work to the best effect and can never deliver a waterproof seal as no weatherstrip can do on any side hinged doorset. It is to reduce dust and debris ingress and minimise rain fall ingress too.
Door stays are another option to consider, especially relevant on 50/50 split doors which are used regularly or more exposed to wind than usual.
GDO offer matching pedestrian access doors with the same build as these in our Icon side door range. Widths up to 1320mm wide and 2340mm high with the same lever handle and deadlock arrangement.
These side hinged garage doors are available as the standard 50/50 split. Alternatively for doors under 8ft wide a 1/3 2/3 split can be selected*.
*Please Note: Image shows 50/50 split.
Outwards opening as standard only.
The steel bracing on these side hinged doors gives the doors a robust feel.
Door stays are available as an optional extra.
The side hinged doors are supplied with a standard black handle and internal lock handle.
Side hinged doors have high grade corrosion protected hinges for smooth operation and elimination of leaf “sag”.
All doors feature a strong sub-chassis with bracing plates to ensure rigidity of the door panel.
Standard doors have top and bottom cable operated lock latches to the active leaf and shoot bolts to the inactive leaf for dependable security.
The side hinged doors are available in White RAL 9016 as standard, or available in the classic low gloss solid colours as below:
Choose from the classic low gloss solid colours as below:
STANDARD FOC COLOURS:
White RAL9016
Black RAL9005
Grey RAL7016
PREMIUM COLOURS
Signal Grey RAL7004
Sudty Grey RAL7037
Traffic Grey RAL7042
Light Grey RAL7035
Window Grey RAL7040
Basalt Grey RAL7012
Pebble Grey RAL7032
Iron Grey RAL7011
Slate Grey RAL7015
Graphite Grey RAL7024
Agage Grey RAL7038
Black Grey RAL7021
Steel Blue RAL5011
Cobalt Blue RAL5013
Sky Blue RAL5015
Gentian Blue RAL5010
Signal Blue RAL5005
Light Blue RAL5012
Moss Green RAL6005
Fir Green RAL6009
Chartwell Green BS14 C 35
Ruby Red RAL3003
Traffic Red RAL3020
Chocolate Brown RAL8017
Clay Brown RAL8003
Mahogany Brown RAL8016
Light Ivory RAL1015
Cream RAL9001
Traffic Yellow RAL1023
Installation instructions can be found here
These insulated hinged doors have all the difficult parts pre assembled already and you have delivered a complete doorset.
You simply have to offer the doors in their prefitted frame into the opening and secure the fixing frame and then adjust levels in the process.
A level floor is essential for the best results and a square aperture also makes installation easier but there are adjustments all round and in all directions.
2-year Product guarantee
The standard guarantee of 2 years is given to the holder of the product that covers all parts and the panel providing the serial number is readable, intact and in place. Factory applied paint finishes are 2 years on steel doors that have standard colours applied.
The product is given a 2 year warranty for hinges and locking for normal use whereby normal use consists of no more than 5 operations (open/close) per day. We recommend the product is inspected and serviced annually by a competent engineer from the garage door industry, the warranty for parts replaced by an engineer or for supply only is 6 months or for the remainder of the warranty period. If warranty work is carried out the product guarantee does not extend past the anniversary of installation/ supply date.
* Terms and conditions apply, full details can be found here
Always remember to allow for some fitting tolerance when ordering. In a perfect world we would recommend about 10mm all round, meaning you measure the width and height and then take 10mm off the smallest dimensions all round and this gives the Ordering Sizes. In real world apertures the floor is often not level and the aperture not totally square so please make sure you allow enough tolerance to cater for any out of square dimensions.
Minimum & Maximum Ordering Sizes
1/3 2/3 |
Min width |
1500 |
50/50 |
Min width |
1500 |
1/3 2/3 |
Max width |
2438 |
50/50 |
Max width |
2650 |
1/3 2/3 |
Min height |
1500 |
50/50 |
Min height |
1500 |
1/3 2/3 |
Max height |
2286 |
50/50 |
Max height |
2286 |
