Hormann N500 Style 402 with Wicket Door Up and Over Steel Hormann

The Hormann N500 Style 402 with Wicket Door - please note image shows door without a wicket door.

Smooth and quiet door operation - twin rollers in the guide rail and guide rollers with ball-bearings allow the door to operate smooth and quietly.

Safety and Security - protection against finger injuries on the side and bottom edges.

Practical wicket door - the wicket door can either be on the left or right hand side or as a central wicket door.

The steel door leaf and subframe are flush-fitting and have the same colour. The door can be fitted flush with the facade, in the reveal or behind it. This door is always steel framed and the ordering sizes are not quite the same as other doors so please study the 'Measure' tab and links carefully or call or email us for help on ordering this unique door.

Double seals on the doors lower edge effectively prevent the ingression of leaves, hail and snow.

Factory Fitted Steel Fixing Frame

The steel sub frame offered as an option is also finished in the same white finish as the door and saves a lot of time and money over a timber sub frame option whilst also offering tighter tolerances around the edges of the door panel.

We recommend the steel sub frame for all up and over garage doors.

We offer 2 sizes for the steel sub frame, a 60mm wide frame which can only be used on the canopy operating mechanism and a 75mm wide frame which is offered on the canopy or retractable gear mechanism. The retractable operating gear can only have the 75mm frame option.

Retractable mechanism with steel frame

Choose Handle Option
Choose from a selection of high quality round handles to include euro cylinder security locking with a 2 point internal locking rod system as standard.

A choice of a standard nylon black handle or various aluminium and stainless steel options.

Selection of door colours available:

Door leaf and frame made of high quality galvanised steel material.

With polyester powdercoating on both sides
(high-quality primer-coating)

Standard Interior and exterior:
> Traffic White RAL 9016

Colour (preferred colours based on the RAL colour chart):
> RAL 1015 Light Ivory
> RAL 6009 Fir Green
> RAL 7016 Anthracite Grey
> RAL 7035 Light Grey
> RAL 7040 Window Grey
> RAL 8028 Terra Brown
> RAL 9006 White Aluminium

> RAL to choose, based on the RAL colour chart
> Hormann colour CH 703 (Anthracite Metallic)
> Special Colours (on request)

Frame
The door fixing sub frames are made of galvanised square tubes. Top frame 120 x 60mm or 160 x 60mm, side frame 120 x 60mm. Powdercoated primer in door leaf colour. Better security and weather sealing and no painting required

Door leaf
Galvanised door leaf frame made of 80mm wide outer profiles and 60mm wide centre profiles with 60mm profile depth to hold door leaf infills. Bottom profile reinforcement from a door width of 4000mm.

Counterbalance
Multiple spring safety system with trap protection provided by tight coils. Depending on the weight of the door leaf, with different spring rates and 6-10 springs on each side. Zinc plated springs for the longest life span.

Round synthetic handle outside, synthetic star handle inside, special lock with multi-point locking with profile half cylinder and lock and release pin operated from the inside, 2-point locking by self-engaging plastic rotary catch (adjustable).

Installation details provided with every door. The N500 door is mostly factory assembed and ready to simply fit directly to the structural surroundings.

Installation instructions are available to download: Horman retractable installation instructions.pdf 

Warranty

Hörmann products are manufactured to the highest quality standards and leave our factory only after rigorous quality testing. However, if you should have grounds for complaint, this section tells you what our door warranty offers, and how to go about making your claim.
In the unlikely event of a warranty claim becoming necessary, please contact the dealer or distributor who originally supplied your garage door. Your dealer should then supply details of the claim, together with a copy of the warranty card provided with the door and proof of purchase to the Product Services Department at Hörmann (UK) Ltd. To enable your claim under warranty to be processed as quickly as possible, you should provide the following details:
1 Your name, address and telephone number
2 Original invoice with date of purchase
3 Product description/door type and product number
4 Description of defect
An assessment of the claim will then be made. This may require Hörmann to inspect the product in-situ. In the event that there is no legitimate warranty claim under the terms specified herein, you may be liable for the costs of the inspection visit. We strongly recommend that you take note of the care and usage instructions displayed on the stickers on the back of your garage door, and on the page opposite, and that you follow these instructions throughout.

Hörmann (UK) Ltd Garage Door Warranty

Warranty Period
The purchaser is granted a warranty covering the safe and reliable function of the Hörmann garage door for a period of 10 years from the date of purchase. A 5 year warranty applies to springs, wire cables, track rollers, hinges and guide rollers. The warranty period for replacement parts is 6 months or to the end of the current warranty period, whichever is longer. In the case of foilcoated timber-effect, a warranty of 5 years is granted, for timber and GRP doors a warranty of 2 years is granted on the door panels alone under the terms and conditions specified herein. The door mechanism and steel frame (if applicable) is covered by the 10 year warranty period.

Requirements
Warranty claims are only applicable in the country where the garage door was purchased. The product must have been purchased through our authorised distribution channels. The warranty only covers damage to the contract object. The fully completed warranty card together with the receipt of purchase correspondingly dated substantiates your right to claim under the warranty.

Performance
During the warranty period we undertake to rectify any and all defects to the Hörmann product which can be proved to be attributed to a material or manufacturing fault. We pledge at our discretion either to exchange the defective merchandise for faultless merchandise, repair it or allow a reduction in price. We do not accept costs for dismantling and installation nor for carriage.
Replaced parts become our property.

The warranty does not cover damage caused through:
• normal wear and tear
• improper installation
• negligent care and maintenance
• improper initial and subsequent operation
• negligent or wanton destruction
• external influences such as fire, water, salts, alkaline solutions, acids, abnormal environmental influences
• mechanical damage through improper transport and fitting
• priming and other surface protection treatments
• incorrect or too late applied surface protection treatments
• repair by non-qualified persons
• using non-Hörmann parts without the approval of the manufacturer
• removal of the product number or making it unidentifiable

Electric Operator Warranty
A separate 5 year warranty is granted on our electric operators. This includes operator mechanics, motor and motor control systems. A 2 year warranty is granted on radio equipment, accessories and system controls. There is no warranty on consumables (e.g. fuses, batteries, bulbs etc.).

User Information/Care
Finish - Steel Doors
The coating process applied to the door and chassis is environmentally friendly. Minor scratches or marks are not covered under the conditions of our warranty and should be repaired immediately to prevent corrosion and deterioration of the panel. Corrosive substances such as acids, alkalines, and salts, etc. should be cleaned from the door immediately; failure to do so will result in deterioration of the finish, which will not be covered under our warranty. Should deterioration of the finish start to occur you will need to repaint your door immediately. Prepare the surface lightly with wet and dry. Then treat with solvent based 2 pack epoxy wash primer and a normal commercial paint (cellulose paint must not be used). Hörmann steel doors are a finished product. They do not require re-painting on site. They are however not immune to damage, which can occur at any stage of the handling of the product from factory to site.

Finish - Timber Doors
Timber panels are coated with a neutralising base-stain. Doors must be stored upright, under cover, with wrapping intact, until wrapping is removed. As soon as the door is unwrapped, one coat of a good quality basecoat primer must be applied to both sides of the door. Immediately after installation, your timber doors require a further two coats of a good quality exterior wood finish on both sides. Initial application and periodic treatment should be carried out strictly in accordance with the woodstain manufacturer's instructions. Failure to follow these instructions will result in early deterioration of the timber panel.

Finish - GRP Doors
GRP door panels should periodically washed down using water. This should be done more frequently if fitted near the sea. Bird droppings will bleach the finish on GRP. and should be removed using water as soon as possible. GRP doors should not be painted over.

Paint Finish - Steel Doors
Minor surface damage can easily be repaired using touch up sprays or sticks without invalidating warranties.

For further information, click here >