GDO Roll 77 Electric Push Button Control (18 Premium Colours) Insulated Roller door garage door Aluminium GDO

NEW from GDO, this aluminium, double skinned, insulated roller garage door keeps life simple, but also is fully compliant with UK regulations on the use of electric operated doors and makes perfect sense if you don’t come in and out your garage with a vehicle every day. If you have an integral garage right next to your home with a pedestrian access door, then this is a roller door for you.

If you are not bothered about remote control operation and your garage is integral or always entered on foot, then this might be the perfect door for you? A simple, neat wall mounted up and down control gives you buttons to raise and lower the door without the need for electronic safety systems such as infra red beams or bottom edge sensors. This is a hold to run logic, so you simply hold the button until fully open or closed. Installation of this simple electric roller door is as easy as it gets as there are no complex electronics to set up.

GDO insulated roller doors are manufactured in the UK for Garage Doors Online by the leading garage door supplier SWS/AlluGuard. Their decades of manufacturing experience ensure only the highest quality materials and production techniques are used, whilst the simplified design helps keep costs as competitive as possible.

Made to measure sizes up to a maximum width of 5200mm including the guides either side. Maximum height is 2900mm plus the height of the roll and endplates which is 300mm. The side channel guides are either 70mm or 90mm depending on the door width ordered. Doors over 3000mm wide will always have 90mm guides as standard, so the clear opening width will be 180mm less than the ordering width.

The door curtain is available in 18 premium and high quality powdercoated colours with optional half or full hood in a matching colour. If you require a contrasting hood or guides colour please call or email for details and pricing.

The door also has an internal manual winding handle system to operate in the event of a power failure. If you don’t have a separate pedestrian access to your garage you should look at the Semi Auto Button control model to operate the door from outside and inside. With this roller door model you can order an external key switch for door operation externally, but also have internal controls. We would also suggest you order the external manual low level release in case of a power failure if you have no other means of access.

It is also possible to always upgrade this roller door at any time in the future with various control panels and access control methods. You have the basic electric door with basic control, but can always change if your garage changes, or you want other control methods later.

Domestic or light commercial applications with less than 20 operations per day.

There are no options required for this door specification as the door is only operated by means of a wall mounted internal button switch with up or down direction drive.

You require a separate access to your garage to operate this door with the internal only button control system. Internal emergency manual override is also fitted as standard and only accessed from inside the garage on the same side as the motor drive which you can specify when ordering.

The GDO ROLL 77 is constructed from high quality 77mm deep double skinned aluminium slats with a foam filled core. It is a made to measure, electric operated roller garage door as standard, made to the exact millimetre in width and height.

The roller door is electrically operated as standard and incorporates an internal emergency manual release in case of a power failure. This is a winding process using a winding handle provided attaching via a hook to the eye of the motor drive. This can be specified as either on the left or right as viewed from inside the garage.

The curtain of this door rolls around a steel barrel which is supported either side by steel endplates which have a dimension of 300mm x 300mm, which is the headroom required if you wish to hide the roll. Always allow for a maximum 50mm of curtain ‘hang down’ when the door is opened if the opening height is critical to you. This is the same on all roller garage doors.

 

Hand crank	Lined guide	ZF Lock	Barrel	safety brake

 Fitting Position
> Between the opening
> Behind the opening
(for maximum width and height). This gives it the freedom to be fitted in the most complex locations regardless of the shape of the garage opening. Single and double garage door sizes are catered for meaning almost all requirements can be met. This makes it highly practical for owners of 4x4 vehicles or similar cars of a large nature who otherwise find problems driving into their garage. This installation style can be used to install the door externally, however, this will cause the motor handing and curtain to be reversed.

Hood cover option:  

 Please note: upon delivery, the accessory box will include a QR code to direct you to the most up-to-date installation instructions.

Ordering size is the Over Guide Width (OGW) x Guide Height (GH).

Doors up to 3000mm wide have 70mm wide guides
Clear opening width = Ordering size + 140mm*

Doors over 3000mm wide have 90mm wide guides
Clear opening width = Odering size + 180mm*

* These measurements are correct for behind fit installations, please contact us for guidance inbetween fit installations.

Clear opening height = guide height - 50mm (to allow for the bottom slat hand-down into the guide). 
Overall Height is the guide height plus the endplate size at 300mm